Question 1

If I use VuPlex on the painted fuselage, will it give me problems when I come to repaint it?

Accepted Answer

No. If proper painting preparations are carried out, VuPlex will not effect this procedure.

Question 2

Does VuPlex cause windows to craze?

Accepted Answer

No. It is designed to slow this process down. Crazing (small fine cracks on the surface) is caused by moisture penetrating into the surface of the acrylic at ground level. When the aircraft goes to elevation and the temperature drops to below freezing, the moisture expands and forces the plastic apart, causing the small cracks. VuPlex is designed to seal the pores of the acrylic,locking out the moisture and avoiding the problem. In addition to this, VuPlex creates excellent water shedding qualities thatmakes vision clearer in rain. Crazing can also be caused by the incorrect chemicals being used to clean the surface.

Question 3

Does VuPlex have a Military Specification? (mil-spec PP 560)

Accepted Answer

This mil-spec is the American spec for care and maintenance of aircraft acrylic windows and is sometimes followed in other parts of the world as the normal. VuPlex meets or exceeds this spec although does not have an actual mil-spec rating.

Question 4

Is VuPlex certified for use on aircraft?

Accepted Answer

VuPlex doesn’t have any certification as such. It is up to the individual manufacturers to endorse it or the owners to use it. There is no such regulation about cleaners to be used on acrylic aircraft windows. The best response is the track record of the product in the aviation industry in Australia. We are used by sectors of Qantas on the Bombardier Dash-8 aircraft.

Question 5

Can you use this product on the outside of a car windscreen?

Accepted Answer

Yes you are able to use it on the outside windscreen and it is very efficient in making sand pitting less visible and acting similar to other water dispersant products, however, we don’t recommend this application due to the windscreen wipers “chattering” across the surface of the windscreen possibly impeding clarity of vision.

Question 6

Does VuPlex contain silicone?

Accepted Answer

Yes, but only small amounts and it is not the curing type that binds to the surface.

Question 7

How long does the can go?

Accepted Answer

Approximate can coverage:-

375g = 30 m2 200g = 16 m2 50g = 5 m2

Question 8

How long does it last?

Accepted Answer

This is dependent on the environment that the application is used in. If VuPlex is applied indoors, it will last much longer than an outdoor application. The average outdoor durability would be approximately three (3) months or if the clarity or shine is starting to be lost, just re-apply.

Question 9

Is VuPlex safe to leave on board my boat?

Accepted Answer

Yes, the can is specifically designed to withstand the marine environment. It will not rust or corrode.

Question 10

Will it clean the top side roof of my Biminis top?

Accepted Answer

No it is not recommended for this application.

Question 11

Will VuPlex remove mould from my clears?

Accepted Answer

Yes, if the mould has not pitted the surface of the clears too badly.

Question 12

Will VuPlex remove squid ink?

Accepted Answer

No, squid ink is extremely difficult to remove.

Question 13

What about vinyl seat material?

Accepted Answer

Yes, it cleans this as well.

Question 14

Can I use VuPlex on my instrument fascias and high gloss wood veneers?

Accepted Answer

Yes another great application.

Question 15

Can I use VuPlex on my depth finder and fish finder screens?

Accepted Answer

Yes, this is a perfect application. VuPlex helps protect the screen form scratching and maintains maximum vision to theinformation.

Question 16

How does VuPlex work to make plastic windows so clear again?

Accepted Answer

VuPlex works on boat windows in 4 ways. 
1. Cleans the salt and other contaminates away from the pores and scratches using safe chemicals that won’t harm theplastic.
1. Removes static that attracts dust, dirt and abrasives to the surface.
1. Deposits a waterproof polymer film that also repels water and salt.
1. Increases scratch resistance by increasing surface slip.

Question 17

What makes my acrylic widows and flexible clears (insulglass) go milky and opaque?

Accepted Answer

Acrylic material (Perspex, Plexiglas) is very easily scratched, particularly in marine environments where sand and dried saltcrystals quickly abrade the surface if not cleaned correctly. In addition to this salt can hide in the scratches and pores of theplastic. When this salt dries coupled with micro-scratching , it accumulates and creates an opaque appearance. Clear PVC (clears or insulglass) used for bimini tops, dodgers, fly bridges also falls fate to salt impregnation. Clear flexible PVCis very porous and over time accumulates salt, creating an unsafe opaque look. Also if Clear PVC is immersed in water for anylength of time, it will absorb moisture that will cause bad fogging. This can be solved by drying in the sun for a day or so.

Question 18

Does VuPlex stop salt form sticking to my clears on my boat?

Accepted Answer

Yes, VuPlex seals the surface of plastic and makes water beads slide right off. When the water dries as a bead, the residualsalt crystal doesn’t stick to the surface and is easily removed with fresh water.

Question 19

Can I use VuPlex on gelcoat?

Accepted Answer

Yes you can if the gelcoat is in reasonable condition. If it’s too badly faded, you will need to use a cutting compound first toremove any heavy oxidization.

Question 20

Will your product burn on my chrome exhaust pipes?

Accepted Answer

No, the residual film have a very high temperature tolerance, however, it’s best to use VuPlex when the pipes are cold.

Question 21

Will VuPlex improve vision in wet conditions?

Accepted Answer

Yes, VuPlex will shed water very efficiently off your windscreen and helmet visor. It is specifically designed for this purpose.

Question 22

Is VuPlex an anti-fog agent?

Accepted Answer

No. VuPlex will not act as an anti-fog in very cold conditions.

Question 23

Does VuPlex cause problems with iridium? (metallic coloured finish on plastic)

Accepted Answer

All real iridium only is benefited by VuPlex, but if there is any doubt, try on an inconspicuous area first.

Question 24

Can I use your product on my seat?

Accepted Answer

No, not advisable on seats as it makes the surface slippery

Question 25

Will VuPlex remove grease and chain lubrication off my wheel rims?

Accepted Answer

Yes, the formula is specifically designed to remove such materials. VuPlex will also remove bug splatters, road tar, rubber residue, sticker glue etc, from all surfaces and furthermore, make future grime, less likely to stick again.

Question 26

Can I still use VuPlex on my bike if it’s not plastic?

Accepted Answer

VuPlex is designed as a plastic cleaner and will clean and maintain the clarity of windscreens and helmet visors and well as other hard and soft surfaces such as painted, chrome and vinyl surfaces. All motorcycles have these materials.

Frequently Asked Questions

Filter by Category